Other

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

- AL6061-T6 alloy quick-release seatpost clamp - Stainless steel bushing ensures smooth lever action - Adjustment knob allows for on-the-fly fine-tuning - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seatpost and steel frame - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 8mm - Outer Diameter: 22mm - Width: 7mm

Nylon fiber OS adapters are designed for use in frames with worn-out, oversized bottom bracket shells - Replaces standard nylon fiber overmolds found on Origin8 Revolvr BB30 and PF30 outboard thread-together bottom brackets - Use BB30 OS adapters with Origin8 Revolvr BB30 outboard thread-together bottom brackets 211051 and 211052 - Use PF30 OS adapters with Origin8 Revolvr PF30 outboard thread-together bottom brackets 211053 and 211054 - Requires a special installation/removal tool (P/N# 610817) - Shell: 68/73mm x 42~42.1mm - Interface: BB30 - Cup Material: Nylon Fiber

A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.

- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex

Box One™ fork adapters let you run standard "Male" 10mm (3/8" axles) in a fork designed for 20mm axles. - Material 6061-T6 Aluminum

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

Box Two™ Brake Post Extenders are the perfect solution for those riders needing extra brake pad adjustment without switching frame sizes. CNC-machined from 6061-T6 aluminum, Box Two™ Brake Post Extenders easily mount to any frame's existing cantilever brake bosses. They provide an additional 16 mm of brake arm positioning. Typically, they are most useful when a rider transitions from one wheel size to the next (i.e., 451 to 406). Depending on your application, they can be mounted in either one of two positions -- above the frame's v-brake mounts or below (see Technical). FEATURES: - Cantilever brake boss compatible - 16 mm of brake arm positioning - 6061-T6 aluminum - Thread M10 x 1.25 SPECIFICATIONS: - Material: 6061-T6 Aluminum - Thread: M10 x 1.25 - Weight: 32 grams / 1.1 ounces

Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake