Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

XLAB Aero Cage Optimizer
$21.95
XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).
XLAB Super Wing Dual Rear Carrier
$99.95 - $107.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
Profile Design HC Mount w/KA1 Cage
$25.99
Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.
Minoura SGS-400-OS Clamp
$19.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Hydrapak Elite Quantum Clip
$5.99
Keep your hose handy with Hydrapak's Elite Quantum Clip. It uses a magnet to easily snap your high-flow drink tube in place along any point on the shoulder or sternum strap of your pack (sold separately) while riding, running, or hiking.
Hydrapak Elite Straight Shot Plug-N-Play Connector
$6.99
Hydrapak's Elite Straight Shot Plug-N-Play Connector easily allows you to disconnect the tube from your Hydrapak reservoir (both sold separately). With the push of a button you can simply remove the reservoir from your pack and leave the tubing, allowing for easy refilling and cleaning.
Hydrapak Hydrafusion Tube Kit
$14.99
Always have a cold sip of water at your lips with Hydrapak's Hydrafusion Elite Tube Kit. The tube has insulation that is applied to the tube itself, instead of an insulated sleeve, adding durability and simplicity to your pack system.
CamelBak Big Bite Valve Cover
$9.99
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.
BiKASE Handlebar/Seat Post Bottle Cage Bracket
$9.99
BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates
XLAB Carbon Wing Dual Rear Carrier
$185.95
Carry your gear behind you tucked out of the wind with XLAB's Carbon Wing Dual Rear Carrier. This versatile aero add-on provides options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages mount on the outside and tubes can go underneath (all accessories sold separately). The possibilities are endless. You also have 3 mounting options that fit most seats so you can place your bottles just where you want them. And, the Carbon Wing is made of stiff, super-light carbon so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps. It can be used with standard 7mm metal-rail saddles or carbon-rail saddles.
XLAB Delta 400
$99.95
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
XLAB Delta 425
$99.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
XLAB Mezzo Cage Pod
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
XLAB Mini Cage Pod
$9.95
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
XLAB Raptor Talon Pair
$5.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
XLAB Super Wing SMP Dual Rear Carrier
$127.95
Carry your gear tucked out of the wind with XLAB's Super Wing SMP Rear Carrier designed specifically for Selle SMP and Phenom saddles. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles just where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps.
XLAB Torpedo Reload Kit
$44.95
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
XLAB Torpedo Versa Mount - Aluminum
$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
XLAB Torpedo Versa Mount - Carbon
$69.95
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
XLAB Turbo Wing Dual Rear Carrier
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
Topeak DP Mount
$22.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Topeak Tri-BackUp Air Station
$13.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included
Topeak Tri-BackUp Elite
$59.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Topeak VersaMount
$9.95
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)
Sunlite Adjustable Bottle Cage Mount
$17.99
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm
Profile Design Aerodrink BTA Water Bottle Bracket
$29.00
The Aerodrink BTA bracket offers secure bolt-on bottle mounting to aero bars and adapts to a variety of extensions. It includes a durable restraining strap for easy bottle installation and removal and an adapter to fasten horizontal BTA hydration systems. - Fits single and dual chamber systems along with horizontal BTA systems (with included adapter) - Attaches to bars with bolt-on adjustable wings that adapt to different aero bar width extensions - Adjusts to 140mm wide - Compatible with Profile Design FC25/FC35 hydration systems, Aero HC bottles, Aqualite bottles, Aerodrink bottles, Aquacell bottles, and standard bottles and cages - Made of Injected Nylon and Glass fiber - Weight: 130g
Profile Design Water Bottle Storage II
$12.00
Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.
Problem Solvers Bottle Cage Height Adapter
$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Park Tool Bottle Opener
$7.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
Park Tool Coffee Mug
$11.49
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!
Page 1 of 2 Next page